Filtres
Filtres
Français (CH)
CHF
+41 22 311 41 91
Menu

Traxxas

Traxxas

_sort_by_popularity_descasc
96 Par page
Speed bit, nut driver, 7.0mm
1090
En stock
+ −
Suspension arms, green, rear (right), heavy duty, adjustable wheelbase (up per (1)/ lower (1))
1650
En stock
+ −
Hardware kit, stainless steel, X-Maxx (contains all stainless steel hardwa re used on X-Maxx)
7590
En stock
+ −
Differential kit, center (complete) ( aluminum carrier, 100K wt differentia l fluid) (fits Maxx or Maxx Slash)
8790
En stock
+ −
Carrier, differential (aluminum)/ o-r ing gaskets (2)/ ring gear gasket/ sp acers (4)/ 12.2x18x0.5 MW/ 3x15mm fla
2490
En stock
+ −
Ball bearing set, TRX-4 Traxx├óÔÇ×┬ó, bla ck rubber sealed, stainless (contains 5x11x4 (40), 20x32x7 (2), & 17x26x5
12690
En stock
+ −
Suspension arms, blue, front (left), heavy duty (upper (1)/ lower (1))
1650
En stock
+ −
Tires and wheels, assembled, glued (2 .6' black, satin chrome-plated Merced es-Benz G 500 4x4 wheels, 2.6' tires
5490
En stock
+ −
Suspension arms, red, front (left), h eavy duty (upper (1)/ lower (1))
1650
En stock
+ −
Tires & wheels, assembled, glued (2.8 ') (RXT black wheels, Gravix tires, f oam inserts) (4WD electric front/rear
3590
En stock
+ −
Driveshaft assembly, front or rear, M axx Duty steel core (left or right) ( 1) (fully assembled, ready to install
2490
En stock
+ −
Tires, Maxx Slash (belted) (2)/ foam inserts (2)
6090
En stock
+ −
Suspension arms, blue, rear (right), heavy duty, adjustable wheelbase (upp er (1)/ lower (1))
1650
En stock
+ −
Rebuild kit, constant-velocity drives haft (includes pins for 2 driveshaft assemblies) (for #9755 center drivesh
560
En stock
+ −
Interior, Chevrolet Blazer (1969 -197 2) (clear, requires painting) (includ es rollbar, gauge bezel, steering whe
4950
En stock
+ −
Springs, shock (natural finish) (GT-M axx) (1.150 rate, white stripe) (2)
1090
En stock
+ −
Body, TRX-4 Sport (clear, trimmed, di e-cut for clipless mounting, requires painting)/ window masks/ decal sheet
5890
En stock
+ −
Body, Maxx, green (painted)/ decal sh eet
8790
En stock
+ −
Suspension kit, WideMaxx, red (includ es front & rear suspension arms, fron t toe links, rear shock springs)
6890
En stock
+ −
Wing, Rustler 4X4 (blue)/ 3x8 FCS (3)
830
En stock
+ −
Suspension arms, green, rear (left), heavy duty, adjustable wheelbase (upp er (1)/ lower (1))
1650
En stock
+ −
Tailgate trim/ trim mount/ 3x10mm BCS (7)/ decals (attaches to #10111 body )
1650
En stock
+ −
Turnbuckles, camber link, 49mm (73mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 ri
1090
En stock
+ −
Double seal kit, GTR shocks (x-rings (4)/ 4x6x0.5mm PTFE-coated washers (2 )/ bottom caps (2)) (renews 2 shocks)
360
En stock
+ −
Suspension arms, blue, front (right), heavy duty (upper (1)/ lower (1))
1650
En stock
+ −
Suspension arms, orange, front (right ), heavy duty (upper (1)/ lower (1))
1650
En stock
+ −
Power cable, USB-C, 100W (high output ), 5 ft. (1.5m)
790
En stock
+ −
Turnbuckles, toe link, 47mm (77mm cen ter to center) (assembled with rod en ds and hollow balls) (1 left, 1 right
1090
En stock
+ −
Wheels, 1.0ÔÇØ, 6061-T6 aluminum (silve r-anodized) (4)/ 2x8mm BCS (24)
6090
En stock
+ −
Skid plate, roof (body) (blue)/ 3x12m m CS (4)
830
En stock
+ −
Suspension arms, red, front (right), heavy duty (upper (1)/ lower (1))
1650
En stock
+ −
Suspension arms, blue, rear (left), h eavy duty, adjustable wheelbase (uppe r (1)/ lower (1))
1650
En stock
+ −
Body, Ford Raptor R (clear, requires painting)/ window masks/ decal sheets
8790
En stock
+ −
Body, Chevrolet Blazer (1969) (clear, requires painting)/ decals/ window m asks (includes grille, side mirrors,
14490
En stock
+ −
Body reinforcement set, front (left & right)/ body posts, front (fits #741 2 series bodies)
990
En stock
+ −
Traction boards, green/ mounting hard ware
1090
En stock
+ −
Traction boards, yellow/ mounting har dware
1090
En stock
+ −
Tires & wheels, assembled, glued (X-M axx black chrome wheels, Sledgehammer belted tires, dual profile (4.3' out
12690
En stock
+ −
Interior, Chevrolet Blazer (1969 -197 2) (black) (includes rollbar, gauge b ezel, steering wheel and column, shif
6090
En stock
+ −
Toe links, front (molded composite) ( 2)/ hollow balls (4) (77mm center to center)
690
En stock
+ −
Wheels, 1.0ÔÇØ, 6061-T6 aluminum (black -anodized) (4)/ 2x8mm BCS (24)
6090
En stock
+ −
Plate, motor, orange
990
En stock
+ −
Latch, body mount, rear/ rear latch m ount (2)/ 3x8mm BCS (4) (for clipless body mounting) (attaches to #10111 b
1090
En stock
+ −
Interior, Chevrolet Blazer (1969 -197 2) (blue) (includes rollbar, gauge be zel, steering wheel and column, shift
6090
En stock
+ −
Power adapter, AC, USB-C (45W)
2790
En stock
+ −
Chassis, charcoal gray (162mm long ba ttery compartment) (fits flat style b attery packs) (use only with #7430R f
2490
En stock
+ −
Side trim (left & right)/ trim retain ers (left & right) (fits #7412 series bodies)
990
En stock
+ −
Bumper, front (1), rear (1), 6061-T6 aluminum (black-anodized) (assembled with D-rings)/ bumper mounts (front &
6590
En stock
+ −
Body, Chevrolet Blazer (1972), comple te, blue & white (painted) (includes grille, side mirrors, door handles, w
24690
En stock
+ −
U-joints, driveshaft (carrier (4)/ 4. 5mm cross pin (4)/ 3mm headed pin (4) / 4x15mm screw pin (2)/ hex pin (2)/
1390
En stock
+ −
Tires & wheels, assembled, glued (X-M axx black wheels, Sledgehammer belted tires, dual profile (4.3' outer, 5.7
11490
En stock
+ −
Bumper, front (1), rear (1), 6061-T6 aluminum (black-anodized) (assembled with D-rings)/ bumper mounts (front &
6090
En stock
+ −
Wing, Ford Fiesta ST Rally (black)/ b ody posts, rear/ 3x8mm FCS (4) (fits #7412 series bodies)
1650
En stock
+ −
Pro Scale LED light set, front & rear , complete (includes light harness, z ip ties (6)) (fits #9812 body)
3090
En stock
+ −
Ball bearing, black rubber sealed (20 x32x7mm) (2)
1390
En stock
+ −
Wire harness/ mount (for #9790 traile r LED light kit)
690
En stock
+ −
Turnbuckles, camber link, 49mm (63mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 ri
1090
En stock
+ −
Body reamer (aluminum handle)
5490
En stock
+ −
Push rods, aluminum (blue-anodized), heavy duty (2) (assembled with rod en ds and threaded inserts)
2990
En stock
+ −
Suspension arms, lower, blue (left an d right, front or rear) (2) (for use with #8995 WideMaxx suspension kit)
1650
En stock
+ −
Suspension arms, upper, orange (left or right, front or rear) (2) (for use with #8995 WideMaxx suspension kit)
1390
En stock
+ −
Grille/ grille mount/ 3x10 BCS (7) (f ully assembled, includes installed he adlight lenses and decals) (fits #101
2490
En stock
+ −
Speed Bit Master Set, hex driver, 7-p iece straight and ball end, includes premium handle (medium), travel pouch
9490
En stock
+ −
Wheels, 1.9', chrome (2)/ center caps (2)/ decal sheet (requires #8255A ex tended stub axle)
2090
En stock
+ −
Cross brace, body (with clipless latc hes)/ 3x15 BCS (4) (fits #7412 series bodies)
1650
En stock
+ −
Suspension arms, upper, blue (left or right, front or rear) (2)
990
En stock
+ −
Display stand (155mm wheelbase)
1390
En stock
+ −
Bumper D-rings, front or rear, 6061- T6 aluminum (red-anodized) (4)/ 1.6x5 mm CS (with threadlock) (4)
2490
En stock
+ −
Tire & wheel assy, glued (SCT Split-S poke, black, blue beadlock wheels, B FGoodrich Mud-Terrain
3490
En stock
+ −
Suspension pin set, complete (hardene d steel), 4x64mm (4), 4x22mm (4), 4x3 8mm (4), 4x33mm (4), 4x47mm (4)/ 3x8m
3350
En stock
+ −
Suspension kit, WideMaxx, green (incl udes front & rear suspension arms, fr ont toe links, rear shock springs)
6890
En stock
+ −
Motor mount (assembled with 3x6 flat- head machine screw)/ 3.0mm NL (1)
830
En stock
+ −
Shock tower, rear, 7075-T6 aluminum ( green-anodized) (1)/ body mount brack et (1)
3490
En stock
+ −
Body, Ford F-150 Truck (1979), comple te (unassembled) (white, requires pai nting) (includes grille, side mirrors
7590
En stock
+ −
SLIPPER FRICTION PEGS (12)
630
En stock
+ −
SERVO MOUNTS, STEERING (2)
430
En stock
+ −
Suspension arms, orange, front/rear ( left & right) (2) (heavy duty, cold w eather material)
1650
En stock
+ −
Bumper (rear)/ battery box/ battery b ox cover/ switch cover/ body clip/ 3x 15mm RM (2)/ 3x12mm CM (2)
1650
En stock
+ −
Spring, shock (green) (3.7 rate) (2)
690
En stock
+ −
Output gear, center differential, har dened steel (2)
2250
En stock
+ −
Shock tower, front (left & right halv es)
1090
En stock
+ −
Body mounts, front & rear/ body mount posts/ body mount sliders
900
En stock
+ −
Bumper, front (chrome)/ bumper mount (2)/ 3x10 BCS (2)
1650
En stock
+ −
Push bar, bumper, chrome (assembled) (fits #9834 bumper)
1390
En stock
+ −
SPUR GEAR (84-TOOTH) (48-PITCH
430
En stock
+ −
Extension harness, LED lights (high-v oltage)
2090
En stock
+ −
Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (2)
6590
En stock
+ −
Body mounts, rear (left & right) (for clipless body mounting)
1390
En stock
+ −
Latch, body mount (4) (for clipless b ody mounting) (attaches to #10211 bod y)
1390
En stock
+ −
Tires & wheels, assembled, glued (SCT Split-Spoke black chrome beadlock st yle wheels, BFGoodrich Mud-Terrain
3490
En stock
+ −
Speed bit handle, premium (rubber ove rmold)
1390
En stock
+ −
COVER PLATE, STEERING SERVO/ 3
430
En stock
+ −
Driveshaft assembly, front or rear, M axx Duty (1) (left or right) (fully a ssembled, ready to install)/ screw pi
1890
En stock
+ −
CLUTCH SHOES/ SPRING
1050
En stock
+ −
EXHAUST TUBE, (SILICONE) (N.ST
520
En stock
+ −
LINKAGE, STEERING (REVO) (3X30
490
En stock
+ −
Show another 96 products
Catégories
Prix

 – 

  • 0
  • 1699
Stock
Echelle
Age Minimum
Amortisseur
Batterie
Batteries
Capacité
Carrosserie
Chargeur
Chassis
Connecteur
Controlleur
Courant Charge Max. (A)
Courant Continu Décharge
Courant instantané Max
Diamètre roue
Electronique
Empattement
Environnement recommandé
FInition
Garde au Sol
Motorisation
Niveau d'Experience
Radio
Roulements
Servos
Suspension
Temps de Montage
Transmission
Type
Type de Moteur
Type de Pneus
Vitesse
Hauteur
Largeur
Longueur
Poids
Effacer
Quelqu'un à Hombrechtikon vient d'acheter SPUR GEAR, 54-TOOTH (0.8 METRI
LEM3956-SPUR GEAR, 54-TOOTH (0.8 METRI                                                                     
Quelqu'un à Hombrechtikon vient d'acheter Gear, 11-T pinion (32-p) (mach. steel set screw
LEM6747-Gear, 11-T pinion (32-p) (mach. steel  set screw                                                   
Quelqu'un à Altdorf UR vient d'acheter USS Missouri Battleship
ARW96.10301-USS Missouri Battleship
Quelqu'un à La chaux de fonds vient d'acheter TT-02 Hi-Torque Servo Saver Set (Alu Horn)
ARW10.54799-TT-02 Hi-Torque Servo Saver Set (Alu Horn)
Quelqu'un à La chaux de fonds vient d'acheter TT01/TA04 Univ.Shaft
ARW10.53792-TT01/TA04 Univ.Shaft
Quelqu'un à La chaux de fonds vient d'acheter Tuning-Federn Set On Road Hard farbig
ARW10.53440-Tuning-Federn Set,  On Road Hard  farbig
Quelqu'un à La chaux de fonds vient d'acheter Dämpferöl Medium (3)
ARW10.53444-Dämpferöl Medium (3)
Quelqu'un à La chaux de fonds vient d'acheter TT-02 Adjustable Upper Arm Set
ARW10.54874-TT-02 Adjustable Upper Arm Set
Quelqu'un à La chaux de fonds vient d'acheter Touring Car Ground Clearance Gauge
ARW10.22009-Touring Car Ground Clearance Gauge
Quelqu'un à Le Mont-sur-Lausanne vient d'acheter SPORT 3 - SPUR GEAR (66T)
HPI113706-SPUR GEAR (66T)